Bath tub Heater, Pumps, Controls, Jets &
Drains |
|
|
1-800-927-6110 |
|
|
|
|
|
|
Allied's
JTH Series Bathtub Heaters |
|
|
|
|
The Compact JTH Series Heaters constantly
maintain the temperature of your bath with its built-in thermostat
for as long as you care to enjoy. |
|
|
|
|
"T"
Design |
 |
|
|
"Flow-Thru"
Design |
 |
|
|
|
|
- Exclusive "Smart High-Limit"
will not "false trip" from hot tap water. High-limit
trips only if the thermostat fails!
- Access under tub not necessary
to reset high-limit. Simply turn power off and back on!!
- No on/off switch! Heater operates
only when pump is operating.
- Stainless steel "T"
and straight "Flow-Thru" heater design available in
1500 watt heater element.
- Electronic temperature control
maintains tub water at approximately 104° F +/- 1° F.
|
|
|
JTH-1T "T"
DESIGN 1.5KW 120V W/PLG |
|
This heater is ideal when the pump
is being mounted equally between the jets (3 jets to the right
& 3 to the left). The heater would mount on top of the pump
(as shown) running 1" pipe out each side water would equally
distributed. |
|
Free UPS Ground
Shipping |
|
|
|
 |
|
|
JTH-1VF VACUUM FLOW-THRU
1.5KW 120V W/PLG |
|
This heater is ideal for retrofits.
You should have plenty of room to get to the suction line. |
|
Free UPS Ground
Shipping |
|
|
|
 |
|
|
JTH-1F PRESSURE
FLOW-THRU 1.5KW 120V W/PLG |
|
Use this heater when the inlet to
the pump is to close to the tub suction and the pump is not between
jets. Thits best to bring the water in to the center of all of
the jets, so the water is equally distributed. |
|
Free UPS Ground
Shipping |
|
|
|
 |
|
|
